Purpose
BRAVOS PRIME G is an additive intended to improve performance and environmental characteristics of gasoline and protect engines. It effectively removes soot and tar deposits from the surface of injection elements and combustion chamber. In the course of continuous use it reduces fuel consumption reaching its optimum level after 20 hours of work and significantly cleans surfaces of the combustion chamber, valves and plugs as well as injectors and injectors.
Advantages (data confirmed by the results of multi-hour bench tests — see report).
- Reduction of fuel consumption by 7-10%;
- Increase of engine power by 5-9%;
- Decrease in concentration of toxic products of incomplete combustion of fuel (CO, CH) in exhaust gases (from 30 to 35%);
- keeping the fuel system clean;
- Reducing the content of CH and CO in exhaust gases reduces the load on the catalysts of the engine toxicity suppression system, which also increases their service life.
Description of additive action
Selective solvents and surfactants contained in the additive remove the tarred and carbonaceous deposits formed in the combustion chamber and on engine parts.
Due to the use of oxygen-containing components, the fuel oxidation efficiency is increased, the smokiness of exhaust gases and the content of harmful components polluting the atmosphere is substantially reduced.
The composition of the additive includes surfactants which decrease the size of liquid droplets at injection, thus increasing the homogeneity of the mixture and improving the fullness of combustion.
The combination of positive effects of the additive clearly results in increased engine life — between overhaul mileage and overall service life.
Recommended dosage and additive injection
The markedly positive effect of BRAVOS PRIME G is observed in the dosage range of 200 to 1200 grams per ton. Optimal cleaning properties and fuel economy are recorded at dosage of 500 grams per ton. We recommend mixing the additive into fuel, e.g. into a tank with petroleum product in the process of its filling. Dosing of an additive into a fuel flow by a dosing pump is also possible. It is possible to inject the required quantity of additive into a tank with fuel, after which mixing should be carried out by switching on circulation of the mixture through the pump. At least 1.5 volume replacement should be done.
Conditions and term of storage:
Product shelf life is at least 12 months if storage conditions are observed.
The product should be stored in a chemical warehouse under similar conditions to those for motor gasoline and flammable liquids.
Products must be stored in original packaging.
Storage temperature -40°C to +30°C. Do not store near open flame, incandescent objects, direct sunlight or other sources of thermal radiation.
Packaging:
50, 200 litre drums, IBC — cubes (Eurocubes).